The dimensions for the SPC-101 and SPC-102 are as follows:


•  Overall size:  17" length x 3.5" width x 3" height

•  Suction Cups are 2" in diameter

•  Cover cups are 3.5" in diameter


The SPC-101 has a single cover cup.  The SPC-102 has two cover cups and you can adjust the distance between each cup.  The minimum distance between the two cover cups on the SPC-102 is 3.5" and the maximum distance between the two is 6.5"


If the aircraft has a single port, or double ports that are less than 3.5" total width apart, the SPC-101 Static Port Cover is required.


If the double ports are farther than 3.5" apart, the SPC-102 would be required.


If the ports are more than 6.5" apart, the SPC-101 would be required for each port.


Please contact us for information or additional assistance


SPC-102SP-H60   Static Port Cover


An innovative solution for static port protection.  The SPC-102SP-H60 is designed of fiberglass and stainless steel.  It is designed to protect the static port system from foreign debris.  The SPC-102SP-H60 has the following characteristics:


•  Lightweight construction

•  Attaches with two heavy duty suction cups designed to hold with 40 pound removal force

•  No fuselage modification required

•  Installed at temperatures from -20ªF to 220ªF

•  Minimizes the possibility of damage to static ports by being an externally mounted cover

•  Red anodize and red polane outer coatings

•  Adjustable to allow for attaching lever suction cups on or around decals and pin striping

•  NAS approved warning streamer with part number identification


Please see Fit Chart at the bottom of the page for additional information

SPC-101SPF   Static Port Cover


The SPC-101SPF Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.


•  Durable epoxy resin coated fiberglass laminate construction 

•  Universal design to fit most aircraft

•  Lightweight - entire assembly weighs less than one pound

•  Attaches with heavy duty lever cups designed to hold 40 pound removal force

•  No fuselage modification required

•  Minimizes the possibility of damage to static ports by being an externally mounted cover

•  NAS approved warning streamer attached with nylon coated stainless steel wire

•  Installed at temperatures from -20ª F to 220ª F

•  Identification numbers or logos may be printed on parts or warning streamers


Please see Fit Chart at the bottom of the page for additional information

SPC-101   Static Port Cover


The SPC-101 Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.


•  Universal design to fit most aircraft

•  Lightweight - entire assembly weighs less than one half a pound

•  Attaches with heavy duty lever cups designed to hold 40 pound removal force

•  No fuselage modification required

•  Minimizes the possibility of damage to static ports by being an externally mounted cover

•  Malleable light guage anodized aluminum easily conforms to virtually any surface  

•  Adjustable to allow for attaching lever cups on or around decals and pin striping

•  Installed at temperatures from -20ª F to 220ª F

•  Identification numbers or logos may be printed on parts or warning streamers


Please see Fit Chart at the bottom of the page for additional information

STATIC PORT COVERS

SPC-102   Static Port Cover


The SPC-102 Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.


•  Universal design to fit most aircraft

•  Lightweight - entire assembly weighs less than one half a pound

•  Attaches with heavy duty lever cups designed to hold 40 pound removal force

•  No fuselage modification required

•  Minimizes the possibility of damage to static ports by being an externally mounted cover

•  Malleable light guage anodized aluminum easily conforms to virtually any surface  

•  Adjustable to allow for attaching lever cups on or around decals and pin striping

•  Installed at temperatures from -20ª F to 220ª F

•  Identification numbers or logos may be printed on parts or warning streamers


Please see Fit Chart at the bottom of the page for additional information

Tel: (252) 833-4980

Fax: (252) 833-4985

Email: sales@sesametech.com

Specializing in Aviation Ground Support Maintenance Products

Sesame Technologies Inc.

Static Port Cover Fits On Information